Troubleshooting DaVinci Resolve Windows Startup Problems - Solutions Inside

Looking for a solution to theDaVinci Resolve won’t open problem? No matter if your Resolve is not responding at all or gets stuck at the loading screen, you can try the following methods to fix the problem immediately.

Try these fixes

1. End the Resolve process
2. Unplug USB devices
3. Launch DaVinci Resolve in Compatibility mode
4. Update the graphics driver
5. Increase the Virtual Memory
6. Enable IGPU Multi-Monitor in BIOS
7. Uninstall your antivirus software
8. Allow TCP Network Port Access
9. Reinstall DaVinci Resolve

Fix 1. End the Resolve process

The first thing you should try is to end the DaVinci Resolve process in the Task Manager. Here’s how:

1. PressCtrl + Shift + Delete to open Task Manager.

2. Locate any process that is related to Revolve.

3. Right-click on it, and selectEnd task .

Now you have forced shut down your Davinci Resolve. Launch the program again and you will be able to open it without any problems.

No luck? Don’t worry. We have a few more fixes for you.

Fix 2. Unplug USB devices

According to what many Resolve users have suggested, USB devices can cause your Resolve to not open so you can unplug these devices to check if your Resolve works again.

Resolve will act up especially if you’re using a USB headset as the audio output device. Once you have removed the USB device from your PC, launch your Revolve again.

Fix 3. Launch DaVinci Resolve in Compatibility mode

Still can’t launch your Resolve? It might be caused by some incompatibility issues, which can be solved by running Resolve in compatibility mode.

1. Right-click on the Resolve shortcut or the executable file in the installation folder, and selectProperties .
   
2. Go to theCompatibility tab, and check theRun this program in compatibility for Windows 8 or Windows 7.
   
3. ClickApply >OK to save the changes.

Now you can run Resolve to test the issue. If DaVinci Resolve is still not responding, you can head on to the next fix below.

Fix 4. Update the graphics driver

Editing videos with this DaVinci Resolve is very GPU-extensive, so it is mandatory to keep the GPU drivers updated (and sometimes your audio drivers, too).

You can update your graphics driver manually, by visiting the manufacturer’s website (NVIDIA /AMD ), finding the latest correct installer and installing step-by-step. But if you don’t have the time or patience to install manually, you can do that automatically with Driver Easy .

Driver Easy will automatically recognize your system and find the correct drivers for your exact graphics cards, and your Windows version, and it will download and install them correctly:

1. Download and install Driver Easy.
2. Run Driver Easy and clickScan Now . Driver Easy will then scan your computer and detect any problem drivers.
   
3. Click Update All to automatically download and install the correct version of all the drivers that are missing or out of date on your system. (This requires the Pro version – you’ll be prompted to upgrade when you click Update All. If you don’t want to pay for the Pro version, you can still download and install all the drivers you need with the free version; you just have to download them one at a time, and manually install them, the normal Windows way.)
   

The Pro version of Driver Easy comes with full technical support.
If you need assistance, please contact Driver Easy’s support team at [email protected] .

After updating your drivers, restart your PC and launch your Resolve to check if the issue has been resolved.

Fix 5. Increase the Virtual Memory

If your system is low on virtual memory, Windows increases the size of your virtual memory paging file. During this process, memory requests for some applications may be denied, e.g your DaVinci Resolve. To alleviate this, you can manually increase the size of your paging file.

1. On your keyboard, press theWindows logo key +R key at the same time, and entersysdm.cpl to open system settings.
   
2. Go to theAdvanced tab and selectSettings underPerformance .
   
3. Once the Performance Options window is open, go to theAdvanced tab and selectChange .

4. Uncheck theAutomatically manage paging file size for all drives . Then selectCustom size , and enter the value accordingly.

Note: It’s recommended to use a number that’sone and a half times the total available memory for the “Initial size ” andthree times of available memory for the “Maximum size ” when possible. (For example, my installed RAM is 16GB, so I set the initial size to 24,000, maximum size to 48,000). If you don’t know your installed RAM, you can press theWindows key +Pause to check your device specifications.
5. Click OK to confirm the change.

Restart your computer for the changes to take effect, and try opening your DaVinci Resolve to check if it launches successfully.

Fix 6. Enable IGPU Multi-Monitor in BIOS

It’s reported by many users that the IGPU Multi-Monitor feature can affect the use of DaVinci Resolve, thus causing Resolve to not open. To enable this feature, you should restart your PC and enter BIOS.

1. Restart your computer and keep pressing the setup key (shown above) as soon as you see the manufacturer’s logo on the screen to enter the BIOS settings.
2. Under theAdvanced Settings, you will see theIGPU Multi-Monitor Option .
3. Switch this feature fromDisabled toEnabled .
4. Save and exit the BIOS.

Fix 7. Uninstall your antivirus software

Antivirus software is known to interfere with many programs, and if you’re experiencing issues with Resolve after installing third-party antivirus software, you might need to uninstall them because disabling them is not enough to prevent them from running in the background.

In the meantime, you should disable VPN services, such as NordVPN, ExpressVPN.

If DaVinci Resolve won’t launch after removing your antivirus software and disabling your VPN, you can try the next fix below.

Fix 8. Allow TCP Network Port Access

Another reason why your DaVinci Resolve is not responding is that it lacks access to your TCP ports, which is necessary for your DaVinci Resolve to launch successfully.

Here’s how to troubleshoot this issue quickly:

1. On your keyboard, press the Windows + R key at the same time, and enterpowershell .
   
2. Enter the following command line:

Get-NetTCPConnection | Where-Object { $_.State -eq “Listen” -and $_.LocalPort -eq 1144 } | ForEach-Object { (get-process -id $_.OwningProcess).Description }
3. If nothing pops up in the next entry, there’s nothing wrong with your TCP network. But if it does, you might need to contact theBlackmagic Design support team with your log file.

• Navigate toC:\Program Files\Blackmagic Design\DaVinci Resolve .
• Double click on theCaptureLogs.bat file (or right-click and then run as administrator).
• It will generate a log file to your desktop –DaVinci-Resolve-logs-.zip .

Fix 9. Reinstall DaVinci Resolve

If none of the fixes above solved your Resolve not opening issue, you can clean reinstall your program and delete all files ( C:\Program Files\Blackmagic Design\DaVinci Resolve ) left behind.

Did this post help you get rid of the problem? Feel free to drop us a line if you have any questions or suggestions.

• crash
• video
• video editing

Also read: